CK30/1200-A GRP Cutter
| Power [W]: | 300 W |
|---|---|
| Speed: | 13000 min-1 |
| Wheel Ø: | 60 mm |
| Cutting depth: | 8 mm |
| Dust extraction: | external dust extraction |
| Current: | Pneumatic |
Product number:
63135000
CK30/1200-A GRP Cutter
Applications
Pneumatic GRP-Cutter (cut off machine) with suction hood for cutting of glass-fibre and carbon-fibre reinforced plastics and plastic material; in vehicle and air craft construction, boatbuilding, rotor blade production and general plastics production as well as switch cabinet construction.
Very small disc diameter of 60 mm
8 mm cutting depth
Optimum cutting speed
Clean cut
lightweight tool
Support edge for safe tool guidance
Effective dust extraction directly at the point of origin
The CK30/1200-A compressed air GRP cutter is the ideal tool for form cutting thanks to its small disc diameter. With its 8 mm cutting depth, it cuts thin plastic and GRP plates also due to the well-adjusted cutting speed and reliably delivers clean cuts that hardly require reworking. The tool effectively sucks the unwanted, often health-damaging dusts into an external dust extraction system directly at the point of origin. The good supporting edge makes this very light and handy tool a precise and easy to use tool for industrial use.
Technical specifications
8 mm cutting depth
Optimum cutting speed
Clean cut
lightweight tool
Support edge for safe tool guidance
Effective dust extraction directly at the point of origin
The CK30/1200-A compressed air GRP cutter is the ideal tool for form cutting thanks to its small disc diameter. With its 8 mm cutting depth, it cuts thin plastic and GRP plates also due to the well-adjusted cutting speed and reliably delivers clean cuts that hardly require reworking. The tool effectively sucks the unwanted, often health-damaging dusts into an external dust extraction system directly at the point of origin. The good supporting edge makes this very light and handy tool a precise and easy to use tool for industrial use.
| Power [W]: | 300 W |
|---|---|
| Speed: | 13000 min-1 |
| Chuck: | Clamping chuck Ø 19 mm |
| Start: | Valve lever |
| Wheel Ø: | 60 mm |
| Cutting depth: | 8 mm |
| Connection dust extraction: | Ø 27 mm |
| Dust extraction: | external dust extraction |
| Weight: | 1.05 kg |
| Recommended hose Ø: | 9 mm |
| Air consumption: | 7 l/s |
| Sound pressure level: | 79 dB(A) |
| Current: | Pneumatic |
| Working pressure: | 6.3 bar |
| Inlet air connection: | G 1/4" |
| Vibration: | < 2.5 m/s² |
Included in delivery:
Tool with suction hood, diamond cutting wheel, hose nipple, assembly wrench.
Options
Skip product gallery
Similar Articles
