Power: | 1700 W |
Speed: | 12000 min-1 |
Chuck: | Collet chuck (Ø 1/4") |
Current: | Pneumatic |
- Article Number: 12166100
Angle grinder
Applications
The pneumatic angle grinder GW170/120-SP is an angle grinder with collet chuck for grinding and milling. The very good power weight ratio and the flexible design make it ideally for industrial applications. This powerful air angle grinder is used in machine building, garages, craft sector, ship yards and automobile industry.
Benefits
1,700 W power for high cutting speed and high removal capacity.
Centrifugal governor for consistent speed under load.
Very good power-weight ratio of 960 (890) W/kg.
Low-vibration types (V) are equipped with autobalancer device for reduction of unbalance and a vibration reducing handle for vibration value of 0.7 m/s2.
Noise reduction of 11 dB with inlet/exhaust air hose complete (hose-in-hose solution).
Pivoting protective cover (270°).
The additional handle can be mounted on both sides.
Spindle lock for easy change of accessory.
High ease of use thanks to convertible valve lever.
Technical specifications
Power: | 1700 W |
Speed: | 12000 min-1 |
Chuck: | Collet chuck (Ø 1/4") |
Clamping Range Ø: | 2.4 - 9.5 mm |
Equipment: | Centrifugal governor, spindle lock |
Start: | Valve lever top |
Handling: | Two-hand operation |
Weight: | 1.42 kg |
Inlet air connection: | G 3/8" |
Recommended hose Ø: | 13 mm |
Air consumption: | 20 / 32 l/s |
Sound pressure level: | 82 dB(A) |
Sound power level: | 93 dB(A) |
Vibration: | 4.0 m/s2 |
Current: | Pneumatic |
P_Max. Betriebsdruck: | 6.3 bar |
The following Documents are available:
Included in delivery:
Tool, exhaust air hose with clamp, hose nipple 3/8"xLW13, standard handle, collet chuck Ø 1/4 mm (Ø 5,55 - 6,35 mm).
Options
Handle vibration reducing
Autobalancer device
Transportation case